Updated November 2026
A riding mower grass bagger collects clippings as you mow, saving you a raking session afterward. The right kit depends on your deck width, your mower’s make and model year, and how much grass you typically cut before emptying. We weighed fit range, bag capacity, mounting design and owner feedback patterns to narrow this list to three options.
Our top picks at a glance
- 1
TOP CHOICEBest overallshiosheng Twin Bagger for Riding Lawn Mowers with 42 Inch 46 Inch Decks 2010 and AfterView on Amazon - 2
Best for John Deere 42-inch decks8TEN TURFBUCKET Grass Twin Bagger System for John Deere 42A DecksView on Amazon - 3
Best for a budget bagger kitdeawater 19A30031OEM 42inch or 46inch Double Bagger for Cub Cadet, Craftsman MTDView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| shiosheng Twin Bagger | Broad mower compatibility | Fits 42 and 46 inch decks |
| 8TEN TURFBUCKET Twin Bagger | John Deere 42A owners | Built for X-series tractors |
| deawater Double Bagger | Budget-minded buyers | Replacement-style twin bags |
shiosheng Twin Bagger for Riding Lawn Mowers with 42 Inch 46 Inch Decks 2010 and After
shiosheng Twin Bagger for Riding Lawn Mowers with 42 Inch 46 Inch Decks 2010 and After, Double Bagger Kit Replaces 19B30031OEM 19A30031OEM, for Cub Cadet, for Troy-Bilt, for Craftsman, for MTD
Best for: Owners who want the widest deck compatibility in one kit.
This kit suits owners with Cub Cadet, Troy-Bilt, Craftsman or MTD mowers with 42 or 46 inch decks built from 2010 onward. The listing states it replaces several OEM part numbers, which helps when you are matching an older setup.
Pros
- Lists fit for several major brands and deck sizes
- Twin bag design spreads the load across two bags
Cons
- Confirm your part number before ordering, since fit varies by model year
8TEN TURFBUCKET Grass Twin Bagger System for John Deere 42A Decks
Best for: John Deere 42A deck owners with X330, X350, X354 or X370 tractors.
This is a model-specific option, so it fits owners who already know their deck and tractor designation. Owners often report that a dedicated kit mounts more cleanly than a generic universal bagger.
Pros
- Matched to specific John Deere 42A deck and tractor models
- Designed as a complete twin bagger system
Cons
- Limited to John Deere 42A compatibility, so it is not a fit for other brands
deawater 19A30031OEM 42inch or 46inch Double Bagger for Cub Cadet, Craftsman MTD
deawater 19A30031OEM 42inch or 46inch Double Bagger for Cub Cadet, Craftsman MTD Riding Mower Bagger Riding Lawn Mowers (2010 and After) and Other Top Models
Best for: Buyers who want a lower-cost option that still covers common Cub Cadet and MTD decks.
This kit targets the same OEM part number family as the top pick and lists support for 2010-and-later models. It is a reasonable choice when you mainly need a straightforward twin bagger for a common deck size.
Pros
- Covers both 42 and 46 inch deck sizes
- Straightforward replacement-style design
Cons
- Fit claims are broad, so verify the part number against your existing hardware
Buying Guide
Match the kit to your deck width
Measure your deck from blade tip to blade tip, then confirm it falls within the kit’s listed 42 or 46 inch range. A bagger built for the wrong width will leave gaps or fail to seat properly.
Check your mower’s make, model and year
Locate the model number on your mower’s data plate and compare it against the kit’s listed compatibility. Manufacturers often change deck mounts between model years, so a 2010-and-later listing still needs a check.
Consider bag capacity and emptying frequency
Twin bag systems hold more clippings than a single bag, which means fewer stops on large lawns. Lighter wet grass fills bags faster in volume, so plan on emptying more often after rain.
Look at how the kit mounts
Dedicated kits usually bolt to existing deck points, while universal designs may need added brackets. Dedicated mounts generally take less time to install and keep the bags more stable while you turn.
Good picks for this: shiosheng Twin Bagger and 8TEN TURFBUCKET Twin Bagger System
FAQ
Will a grass bagger fit any riding mower?
No. Baggers are sized for specific deck widths and mounting points, so you need to match the deck size and brand compatibility listed on the kit.
How do I know if a bagger is the right size?
Measure your deck tip to tip and compare that to the listed 42 or 46 inch fit range. Then check the part number against your existing mower.
Can a bagger damage my lawn?
A full bag adds weight and can leave clumps if you mow wet grass. Empty bags regularly and avoid bagging when the grass is soaked to keep the lawn healthy.
Conclusion
For the widest compatibility, the shiosheng Twin Bagger is the strongest starting point. If you own a John Deere 42A, the 8TEN TURFBUCKET kit is the more precise fit, and the deawater double bagger suits buyers looking for a simpler, lower-cost option for common Cub Cadet and MTD decks.
Sources
- Safety guidance for operating powered lawn equipment and handling mower attachments (osha.gov)
- University extension advice on mowing practices and clippings management (extension.illinois.edu)
Related reading
- Riding Mower and Bagger: How to Choose and Use One in 6 Steps
- 3 Best Riding Mowers with Grass Catcher for Large Lawns (2026)
- 3 Best Grass Catchers for Riding Lawn Mowers: Our Picks Compared
- Yardman Riding Lawn Mower Won't Start: 7 Causes and Fixes
- Yard Machine Riding Lawn Mower Won't Start: 7 Causes and Fixes
- Used Riding Lawn Mower Sale: How to Buy a Good Used Mower in 7 Steps

