Updated November 2026
Mulching blades for riding mower decks cut grass clippings into fine pieces and push them back into the turf instead of bagging or discharging them. The right blade depends on your deck width, your mower brand, and whether you want a single replacement or a multi-pack. The picks below are compared on listing details, brand fit, and recurring owner feedback patterns, with compatibility as the first filter.
Our top picks at a glance
- 1
TOP CHOICEBest overall482879 Mulching Blades Set Replaces Scag 48111 481708 481712 482787 FeView on Amazon - 2
Best for commercial-style decksMaxPower 561713XB 2 Commercial Mulching Blade SetView on Amazon - 3
Best for electric mower usersEGO POWER+ 21" Mulching Blades for Electric Lawn Mowers, 2-PackView on Amazon - 4
Best for a single OEM-style swapOregon 21-3/4" Gator G3 Mulching Blade for 22" Husqvarna Lawn MowersView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| 482879 Mulching Blades Set | 61-inch decks, multi-blade sets | Three-blade replacement set |
| MaxPower 561713XB 2 Commercial Blade Set | 42-inch cut Craftsman and Husqvarna | Multiple OEM part numbers listed |
| EGO POWER+ 21″ Mulching Blades | EGO electric mower owners | Two-pack, 21-inch blade |
| Oregon 21-3/4″ Gator G3 Mulching Blade | 22-inch Husqvarna decks | Gator G3 mulching profile |
482879 Mulching Blades Set Replaces Scag 48111 481708 481712 482787 Ferris 1520842 Husqvarna 539101733
482879 Mulching Blades Set Replaces Scag 48111 481708 481712 482787 Ferris 1520842 Husqvarna 539101733, Compatible with IS1500ZX IS2000Z IS2500Z 61" Deck (3PACK)
Best for: Buyers replacing a full set on a 61-inch deck
This three-pack suits owners of Scag and Ferris-style 61-inch decks who need all blades swapped at once. Listings state compatibility with specific IS1500ZX, IS2000Z, and IS2500Z models.
Pros
- Three blades in one purchase
- Lists many OEM cross-reference numbers
Cons
- Fit is limited to the listed 61-inch decks
MaxPower 561713XB 2 Commercial Mulching Blade Set
MaxPower 561713XB 2 Commercial Mulching Blade Set for Many 42 in. Cut Craftsman, Husqvarna, Poulan Mowers Replaces OEM #'s 138498, 138971, 532138971, 532127843, 532138498
Best for: Owners of 42-inch decks from Craftsman, Husqvarna, and Poulan
This set fits owners who want a heavier-duty mulching blade for a 42-inch cut and need to match an older OEM number. Check your existing part numbers against the listing before ordering.
Pros
- Cross-references several OEM part numbers
- Designed for a commercial-style workload
Cons
- Narrower fit range than universal-style sets
EGO POWER+ 21″ Mulching Blades for Electric Lawn Mowers, 2-Pack
EGO POWER+ 21" Mulching Blades for Electric Lawn Mowers LM2133/LM2130/LM2135SP/LM2130SP/LM2156SP/LM2150SP, 2-Pack – AB2101D
Best for: EGO electric mower owners
This two-pack is aimed at owners of specific EGO POWER+ walk-behind models rather than riding decks. It is a good match if your mower already appears on the listing’s model list.
Pros
- Two blades per package
- Lists several EGO model numbers
Cons
- Not intended for gas riding mower decks
Oregon 21-3/4″ Gator G3 Mulching Blade for 22″ Husqvarna Lawn Mowers
Oregon® 21-3/4" Gator® G3™ Mulching Blade for 22" Husqvarna Lawn Mowers, OEM Part Number 581694301, 580244002
Best for: A single replacement on a 22-inch Husqvarna deck
This single blade suits owners who only need to replace one worn or bent blade on a 22-inch Husqvarna mower. Oregon’s Gator G3 profile is widely recognized among owners who mulch regularly.
Pros
- Lists OEM part numbers 581694301 and 580244002
- Single-blade purchase for quick swaps
Cons
- Only one blade per order
Buying Guide
Match the deck width and mounting
Measure your deck width, typically 42, 48, or 54 inches on most riders, and confirm the blade length on the listing. Blades are usually sold for a specific deck size, and a mismatch will cause balance problems.
Check your OEM part numbers
Remove an old blade and read the stamped number, then compare it against the cross-reference list in each listing. Matching numbers is the fastest way to confirm fit.
Decide between a single blade and a set
Blades should be replaced in pairs or sets so that the deck stays balanced. A single blade makes sense only for a quick replacement of a damaged one.
Look for a mulching profile
Mulching blades have extra cutting surfaces and a different lift profile than standard blades. Owners who mulch regularly often notice finer clippings with these designs.
Good picks for this: 482879 Mulching Blades Set and Oregon 21-3/4″ Gator G3 Mulching Blade
FAQ
Can I use mulching blades on any riding mower?
No. Mulching blades must match your deck width and mounting style, so check the listing’s compatibility list and your OEM part number first.
Should I replace mulching blades in pairs?
Yes, in most cases. Replacing both blades keeps the deck balanced and reduces vibration during operation.
How often should mulching blades be replaced?
Owners generally replace them when edges are dull, chipped, or bent. Check the blades at least once a season, and always disconnect the spark plug before inspecting.
Conclusion
For a full set on a 61-inch deck, the 482879 three-pack is the most direct match. Owners of 42-inch Craftsman or Husqvarna decks should look at the MaxPower commercial set, while a single 22-inch Husqvarna blade points to the Oregon Gator G3. Confirm your deck and part numbers before ordering.
Related reading
- 6 Best John Deere Riding Mower Blades for Your Yard (2026)
- Yardman Riding Lawn Mower Won't Start: 7 Causes and Fixes
- Yard Machine Riding Lawn Mower Won't Start: 7 Causes and Fixes
- Used Riding Lawn Mower Sale: How to Buy a Good Used Mower in 7 Steps
- Troy-Bilt Pony Riding Mower: Model Guide, Features and Buying Tips
- Troy-Bilt Pony 42 Riding Lawn Mower: Setup, Maintenance and Common Fixes

