Updated November 2026
A lawn mower that won’t start after hitting an object usually has a damaged blade, a bent crankshaft, a loose or broken part, or a clogged fuel or spark system. This guide walks you through the safe checks to run before you touch the engine, so you can tell whether the fix is a simple reset or a repair that needs a shop.
Start With Safety
Before you look under the deck, disconnect the spark plug wire or remove the battery cable on electric-start models. Tip the mower only as far as the owner’s manual allows, and keep the fuel cap facing up to prevent oil or gas from leaking into the cylinder. Wear heavy gloves, because a blade can turn if the engine is bumped.
Shopping for one? See our guide: Lawn Mower Won't Start After Running Out of Gas: 3 Best Starting Aids Compared.
Check the Blade and Deck for Damage
Most impacts with rocks, stumps or metal bend or crack the blade. Remove the blade bolt, then inspect the blade for bends, cracks, or chipped edges. A bent blade can throw the engine out of balance and stall it, and a cracked blade should always be replaced, not straightened.
Look at the blade mounting area too. A bent blade adapter or a sheared key on the crankshaft will keep the engine from turning over. Rotate the blade by hand after reinstalling it; if it binds or wobbles, something is out of alignment.
Test the Spark and Fuel System
Pull the spark plug and check for a cracked porcelain insulator or fouled electrodes. Reconnect the plug to the wire, ground the plug body against the engine block, and pull the starter cord. A bright, steady spark means ignition is fine. If there is no spark, check the flywheel key and the ignition module for damage from the impact.
Next, check fuel. Impacts can crack the fuel line, loosen the fuel cap seal, or dislodge the carburetor bowl. Look for leaks around the tank and carburetor, and make sure fresh fuel is reaching the carburetor.
Inspect the Air Filter, Choke and Throttle
- Remove the air filter cover and check for dirt, debris or a cracked filter housing.
- Confirm the choke and throttle cables move freely and return to position.
- Check that the engine shroud and air intake are not pushed against the engine.
- Look for cracked or displaced parts around the carburetor mounting.
Common Mistakes to Avoid
- Repeatedly pulling the starter cord with a damaged blade, which can worsen the imbalance.
- Straightening a cracked blade instead of replacing it.
- Ignoring a bent crankshaft or flywheel key, which can cause internal damage.
- Running the engine after a hard impact without checking the deck and blade first.
- Tipping the mower with fuel or oil in the wrong position, which can flood the engine.
Recommended Gear
- Socket and wrench set helps you remove the blade bolt and inspect mounting hardware safely. View on Amazon
- Replacement spark plug lets you rule out ignition problems quickly once the plug is pulled. View on Amazon
- Heavy-duty work gloves protect your hands when you handle a sharp blade. View on Amazon
For more detail on specific mower types, see Lawn Mower Won't Start After Hitting Something: 7 Checks to Make First and Riding Lawn Mower Won't Start After Hitting Something: 6 Checks to Make First. If you own a Craftsman model, Craftsman Lawn Mower Won't Start After Hitting Something: 6 Checks to Make First covers brand-specific steps.
FAQ
Can a mower start again after hitting a rock?
Sometimes, yes. If the blade, spark plug and fuel system are undamaged, the engine may run again after a reset. If the blade is bent or the engine won’t turn over, stop and inspect before trying again.
Do I need to replace the blade after an impact?
Replace any blade that is cracked, chipped or bent. Straightening a blade can leave stress points that fail later, so it is safer to replace it. If you want more background, see Lawn Mower Won't Start After Oil Change? 3 Oil Change Kits That Help.
When should I take the mower to a repair shop?
Take it in if you find a bent crankshaft, a damaged flywheel, or internal engine noise. A small engine technician can confirm internal damage that is hard to see from outside. Consult a professional for any repair that involves the engine internals.
Conclusion
Start with safety, then check the blade and deck, the spark and fuel system, and the air filter and controls. Most impact-related starting problems trace back to one of these areas. Replace damaged parts rather than repairing them, and call a professional if the engine itself appears to be affected.

