Updated November 2026

A troy bilt lawn mower with honda engine won’t start for a handful of predictable reasons, and most of them trace back to a worn recoil starter, a gummed carburetor, a tired ignition module, or a clogged filter. This guide compares seven replacement parts sold on Amazon US that match Troy-Bilt models with Honda GCV-series engines. Selection was based on listing specifications, compatibility notes, brand reputation and the patterns owners commonly report, so check your engine model number before ordering.

Our top picks at a glance

  1. 1Replacement GCV190 Recoil Starter for Honda Pressure Washer Mower PartTOP CHOICEBest overallReplacement GCV190 Recoil Starter for Honda Pressure Washer Mower PartView on Amazon
  2. 2GCV160 Pull Start Recoil Starter Fit for Honda GCV135 GCV160TOP CHOICEBest for GCV160 enginesGCV160 Pull Start Recoil Starter Fit for Honda GCV135 GCV160View on Amazon
  3. 32PCS Filter Kit for Troy Bilt TB160, TB130XP, TB130 Mowers with Honda EngineTOP CHOICEBest for routine service2PCS Filter Kit for Troy Bilt TB160, TB130XP, TB130 Mowers with Honda EngineView on Amazon
  4. 4595355 Craftsman 37298 37420 140cc Recoil Starter Repair KitBest for repair kits595355 Craftsman 37298 37420 140cc Recoil Starter Repair KitView on Amazon
  5. 511A-B2AQ723 Carburetor Kit, Replacement for Troy Bilt TB160 Lawn MowerBest for fuel problems11A-B2AQ723 Carburetor Kit, Replacement for Troy Bilt TB160 Lawn MowerView on Amazon
  6. 6Tune-Up Kits 11A-B2AQ723 Carburetor Fit for Troy Bilt TB160 Walk-BehinBest budget tune-upTune-Up Kits 11A-B2AQ723 Carburetor Fit for Troy Bilt TB160 Walk-BehinView on Amazon
  7. 7for Troy Bilt TB100 Lawn Mowers 11A-B0BL723 Ignition Coil ModuleBest for spark problemsfor Troy Bilt TB100 Lawn Mowers 11A-B0BL723 Ignition Coil ModuleView on Amazon

Our Top Picks

Product Best for Key feature
Replacement GCV190 Recoil Starter Broad GCV190 compatibility Pull start recoil assembly
GCV160 Pull Start Recoil Starter GCV160 and GCV135 engines Replaces 28400-ZL8-023ZA
Filter Kit for TB160 and TB130 Routine air and fuel service Two-piece filter set
Craftsman Recoil Repair Kit Starter rope and spring repair Covers multiple 140cc models
Carburetor Kit 11A-B2AQ723 Stale fuel and clogged jets Full carburetor rebuild set
Tune-Up Carburetor Kit Budget carburetor refresh Same part number fitment
Ignition Coil Module No spark at the plug Direct TB100 fit

Replacement GCV190 Recoil Starter for Honda Pressure Washer Mower Part

Replacement for 28400-Z0Y-013ZB Generators, GCV 190 GC 190 Engine, HRX217 Lawnmower Power Washer GCV190 GC190 Pull Start Recoil Starter for Honda Pressure Washer Mower Part

Replacement for 28400-Z0Y-013ZB Generators, GCV 190 GC 190 Engine, HRX217 Lawnmower Power Washer GCV190 GC190 Pull Start Recoil Starter for Honda Pressure Washer Mower Part

View on Amazon

Best for: Broad GCV190 compatibility

Suited to owners whose pull cord snaps or no longer retracts and whose engine is a GCV190 model.

Pros

  • Listed for several GCV190 applications
  • Straightforward bolt-on replacement

Cons

  • Fit should be confirmed against your engine code

View on Amazon

GCV160 Pull Start Recoil Starter Fit for Honda GCV135 GCV160

GCV160 Pull Start Recoil Starter Fit for Honda GCV135 GCV160 GC135 GC160 EN2000 HRU19 Troy-Bilt lawnmower Honda engine Generator Engine Motor Replace 28400-Zl8-023ZA GCV160 Recoil Pull Starter

GCV160 Pull Start Recoil Starter Fit for Honda GCV135 GCV160 GC135 GC160 EN2000 HRU19 Troy-Bilt lawnmower Honda engine Generator Engine Motor Replace 28400-Zl8-023ZA GCV160 Recoil Pull Starter

View on Amazon

Best for: GCV160 and GCV135 engines

Fits owners of Troy-Bilt mowers running the common GCV160 engine who need a complete starter assembly.

Pros

  • Lists the original Honda part number it replaces
  • Complete recoil unit rather than loose parts

Cons

  • Installation requires removing the blower housing

View on Amazon

2PCS Filter Kit for Troy Bilt TB160, TB130XP, TB130 Mowers with Honda Engine

2PCS Filter Kit for Troy Bilt TB160, TB130XP, TB130 Mowers with Honda Engine, Replacement Parts

2PCS Filter Kit for Troy Bilt TB160, TB130XP, TB130 Mowers with Honda Engine, Replacement Parts

View on Amazon

Best for: Routine air and fuel service

Useful for owners who want to rule out restricted airflow or fuel flow before replacing anything more expensive.

Pros

  • Two filters in one kit
  • Targets a common cause of hard starting

Cons

  • Does not address internal carburetor or ignition faults

View on Amazon

595355 Craftsman 37298 37420 140cc Recoil Starter Repair Kit

Recoil Starter Pull Starter Repair Kit Compatible for 591139 593959 590588

Recoil Starter Pull Starter Repair Kit Compatible for 591139 593959 590588

View on Amazon

Best for: Starter rope and spring repair

Aimed at owners comfortable rebuilding a recoil assembly rather than replacing the whole unit.

Pros

  • Covers several 140cc Troy-Bilt and Craftsman engines
  • Lower-cost route than a full starter

Cons

  • Requires patience and basic hand tools

View on Amazon

11A-B2AQ723 Carburetor Kit, Replacement for Troy Bilt TB160 Lawn Mower

11A-B2AQ723 Carburetor Kit, Replacement for Troy Bilt TB160 Lawn Mower

11A-B2AQ723 Carburetor Kit, Replacement for Troy Bilt TB160 Lawn Mower

View on Amazon

Best for: Stale fuel and clogged jets

Best for mowers that sat over winter with fuel left in the bowl and now crank but won’t fire.

Pros

  • Matches the TB160 carburetor part number
  • Addresses the most common no-start cause after storage

Cons

  • Carburetor work demands careful cleaning and reassembly

View on Amazon

Buying Guide

Match the Part to Your Engine Model

Before you buy anything, locate the model number stamped on your Honda engine, usually on the blower housing or a label near the carburetor. Many of these parts are sold for several GCV and GC engine variants, but a part that fits one model may not fit another, so compare the listed engine numbers against yours carefully.

Identify the Actual Failure First

A no-start condition can come from a broken recoil rope, a stuck or worn starter pawl, a fouled carburetor, a bad ignition module, or a clogged air filter. Diagnosing the symptom first, such as whether the cord pulls freely or the engine cranks but won’t fire, helps you avoid buying a part you do not need.

Consider the Kit Versus Single-Part Trade-Off

Some listings include a single component, while others bundle several items such as a repair kit with springs, pawls and cord. A kit can save money if you expect more than one component to be worn, but a single part is the better choice when you have already confirmed which piece has failed.

Check Compatibility With Troy-Bilt Models

Troy-Bilt mowers use Honda engines across several model lines, and the same engine can appear in different mower housings. Confirm that the listing names your specific Troy-Bilt model, or at least the engine code, since mounting and linkage details can vary even when the engine is the same.

Weigh Brand Reliability and Return Options

Parts from established suppliers with clear compatibility notes tend to reduce the risk of a wrong-fit return. Because replacement components vary in quality, read recent owner feedback and make sure the seller offers a straightforward return window in case the part does not match your engine.

FAQ

Why won’t my Troy-Bilt mower with a Honda engine start even though it has fuel?

Fuel alone is not enough, since the engine also needs a clean carburetor, a working spark and adequate air flow. Old gasoline often leaves varnish that clogs the carburetor jets, so cleaning or replacing the carburetor kit is a common fix. Check the spark plug and air filter as well before assuming a larger failure.

How do I know if the recoil starter is the problem?

If the pull cord feels loose, pulls out with no resistance, or does not turn the crankshaft at all, the recoil starter is the likely culprit. A worn pawl or broken spring can also let the cord spin freely without engaging the engine. Replacing the starter assembly or repair kit usually resolves this type of failure.

Can I replace the ignition coil module myself?

Many owners replace an ignition module with basic hand tools, but you should disconnect the spark plug wire and keep the engine off during the job. Make sure the replacement part matches your engine code, and tighten mounting hardware to the recommended torque. If you are not comfortable working near the flywheel and magnets, a small engine shop can handle the installation.

How often should I change the air filter on a Honda-powered mower?

Check the air filter at the start of each mowing season and replace it if it is dirty, oily or torn. Mowers used in dusty conditions or for long hours may need more frequent changes. A clean filter helps prevent carburetor problems and keeps the engine running smoothly.

Do I need to drain the gas before storing the mower?

Yes, draining the fuel or adding a stabilizer before long storage is one of the most effective ways to prevent a no-start problem next season. Stale gasoline breaks down and leaves deposits in the carburetor. Running the engine until the tank is nearly empty before storage is another useful option.

Is it worth repairing an older Troy-Bilt mower instead of replacing it?

For many owners, replacing a few inexpensive parts such as a starter, filter or carburetor kit is far less costly than buying a new mower. If the deck, wheels or transmission are also worn, however, the repair costs may add up quickly. Weigh the age and overall condition of the mower against the cost of the parts before deciding.

Conclusion

If your Troy-Bilt mower’s recoil cord spins freely or the starter feels worn, the recoil starter replacements are the best place to begin. If the engine cranks but runs poorly or won’t fire, the carburetor kit, ignition module or filter kit are more likely to solve the problem.

Owners who want a complete tune-up or are unsure which part has failed may find a repair kit or filter kit the most practical choice. Always confirm your engine model number before ordering so the part you receive fits your mower correctly.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our lawn mowers guides, checking product details against manufacturer specifications and owner feedback.