Updated November 2026
When an electrolux lawn mower won’t start, a failed starter solenoid is one of the most common culprits, especially if you hear a single click or nothing at all when you turn the key. This list compares seven replacement solenoids sold on Amazon US, based on fit, build quality and the patterns owners tend to report. Check your mower’s model and the part number on the old solenoid before buying, because compatibility varies.
Best overall: Lawn Mower Starter Solenoid 12V for 192507 – View on Amazon
Best for copper contacts: Lawn Mower 12V 4-Post Starter Solenoid 146154 – View on Amazon
Best for walk-behind turf tracer decks: StensOEM Starter Solenoid 435-435 – View on Amazon
Best for Husqvarna-style replacement: Starter Solenoid for Electrolux Fits Husqvarna 24285 – View on Amazon
Best for Craftsman riding mowers: 192507 Starter Solenoid for Husqvarna Poulan – View on Amazon
Best for budget repairs: Starter Solenoid for Electrolux Husqvarna 44429 – View on Amazon
Best for ignition-related no-start: Starter Ignition Switch for Electrolux Craftsman – View on Amazon
Our Top Picks
| Product | Best for | Key feature |
|---|---|---|
| Lawn Mower Starter Solenoid 12V for 192507 | Overall replacement | Direct-fit 4-post design |
| Lawn Mower 12V 4-Post Starter Solenoid 146154 | Copper contacts | Quick install, many cross-references |
| StensOEM Starter Solenoid 435-435 | Walk-behind turf tracer decks | OEM-style replacement |
| Starter Solenoid for Electrolux Fits Husqvarna 24285 | Husqvarna-style replacement | Broad part-number match |
| 192507 Starter Solenoid for Husqvarna Poulan | Craftsman riding mowers | Multi-brand cross-reference |
| Starter Solenoid for Electrolux Husqvarna 44429 | Budget repairs | Simple swap-in part |
| Starter Ignition Switch for Electrolux Craftsman | Ignition-related no-start | Includes keys and mounting hardware |
Lawn Mower Starter Solenoid 12V for 192507 582042801 582042802
4-Post, fits Craftsman LT2000, YT3000, YS4500, replaces Husqvrana 532192507, direct replacement, reliable starts Lawn Mower Starter Solenoid 12V for 192507 582042801 582042802
Best for: Overall replacement
This suits owners of Craftsman LT2000, YT3000 and YS4500 mowers who want a part that matches the original closely.
Pros
- Listed as a direct replacement for part 532192507
- Owners often report reliable starts after the swap
Cons
- Limited fit outside the listed Craftsman and Husqvarna models
Lawn Mower 12V 4-Post Starter Solenoid 146154 145673
Lawn Mower, fits Husqvrana, Poulan, replaces 532146154, 532145673, 532109946, 894-1221-210, copper contacts, quick install 12V 4-Post Starter Solenoid 146154 145673 for Craftsman 178861
Best for: Copper contacts
This is a practical choice for owners who need a solenoid that cross-references several Husqvarna and Poulan part numbers.
Pros
- Lists copper contacts for conductivity
- Quick install with a 4-post layout
Cons
- Cross-reference list is long, so confirm your exact part number
StensOEM Starter Solenoid 435-435
Best for: Walk-behind turf tracer decks
Aimed at owners of 52-inch and 60-inch floating deck walk-behind mowers who want an OEM-style replacement.
Pros
- Cross-references several Ariens part numbers
- Built as a direct replacement
Cons
- Narrow fit outside Ariens walk-behind models
Starter Solenoid for Electrolux Fits Husqvarna 24285 3367R 44429
Best for: Husqvarna-style replacement
Useful if your Electrolux mower shares components with Husqvarna models and you want a broad part-number match.
Pros
- Lists multiple Electrolux and Husqvarna part numbers
- Simple 12V swap-in design
Cons
- Verify the part number on your old solenoid before ordering
192507 Starter Solenoid for Husqvarna Poulan 532192507
192507 Starter Solenoid for Husqvarna Poulan 532192507 582042802 582042801 Craftsman LT2000 YS4500 YT3000 Trombetta 862-1241-211-12 Ariens 21546294 Riding Lawn Mower Tractor
Best for: Craftsman riding mowers
Suited to owners of riding mowers and tractors who want a replacement that cross-references Craftsman, Ariens and Trombetta parts.
Pros
- Broad multi-brand cross-reference list
- Covers several riding mower models
Cons
- Riding-mower focus makes it less suited to push mowers
Starter Solenoid for Electrolux Husqvarna 44429
Best for: Budget repairs
A straightforward option for owners replacing a solenoid on an older Electrolux or Husqvarna mower.
Pros
- Simple swap-in part
- Covers the same part numbers as the Husqvarna 24285 family
Cons
- Fewer documented cross-references than the premium-style listings
Buying Guide
Match the Part Number to Your Mower
Starter solenoids are not interchangeable across every brand, so start by reading the part number stamped on your old solenoid or listed in your mower’s manual. Confirm that the replacement explicitly lists that number or a cross-reference, since many listings group several models under one title.
Check the model series too, such as Electrolux, Craftsman, Husqvarna, or Ariens, because the same-looking part may use different terminal layouts or mounting points.
Check the Voltage and Terminal Layout
Most of these solenoids are 12V units, which is the standard for garden tractors and walk-behind mowers with electric start. Make sure the voltage and the number and placement of terminals match your existing wiring so you do not have to modify the harness.
Counting the terminals on the old unit before you order will save you a return if the new one looks similar but is wired differently.
Look at Contact Quality
Solenoid failures often come from worn or pitted contacts that cannot carry enough current to crank the engine. Listings that mention copper contacts or heavier-duty internals are generally a safer bet than generic units with little detail about construction.
Consider this factor alongside fit, since a perfect fit with poor contacts will just lead to the same no-start problem again.
Consider Installation and Mounting
Some kits include mounting hardware and quick-connect terminals, while others expect you to reuse the old bolts and connectors. Check whether the bolt pattern and mounting bracket match your mower so you can swap the part in a single session.
If you are not comfortable working around the battery and starter circuit, disconnect the battery first and keep the wiring labeled as you go.
Think About Whether the Problem Is Really the Solenoid
A single click or no response does not always point to the solenoid. A weak battery, corroded cables, a faulty ignition switch, or a loose ground can cause the same symptoms, so it is worth testing the battery and connections before spending money on a new part.
If the battery is fully charged and the cables are clean but the mower still will not crank, a new solenoid is a reasonable next step.
FAQ
How do I know if the starter solenoid is what’s causing my mower not to start?
A solenoid that is failing often produces a single loud click or no sound at all when you turn the key, even with a charged battery. If the battery and cable connections check out, testing the solenoid with a multimeter for power in and power out can confirm the diagnosis.
Can I use a solenoid that is listed for a different brand of mower?
Sometimes, but only if the part number cross-references yours and the terminal layout and voltage match. Many solenoids are shared across Husqvarna, Poulan, Craftsman, and Electrolux models, but compatibility should be verified rather than assumed.
Do I need to disconnect the battery before replacing the solenoid?
Yes, disconnecting the battery is the safest approach before touching the starter circuit. Remove the negative cable first and reconnect it last to reduce the risk of short circuits or sparks.
What tools do I need to swap a starter solenoid?
Most jobs require a socket or wrench set to remove the mounting bolts and terminal nuts, plus a screwdriver for any small fasteners. Some owners also use a wire brush to clean corroded terminals before installing the new unit.
Why does my mower still not start after replacing the solenoid?
The battery may be too weak, the cables may be corroded or loose, or the ignition switch may be faulty. Recheck the battery charge, clean all connections, and test the ignition switch before assuming the new part is defective.
Conclusion
If you have a clear part number and want a straightforward swap, pick a solenoid that explicitly cross-references your model and lists sturdy contacts, since that combination covers most Electrolux and Husqvarna-style mowers. For walk-behind turf or other specialty decks, choose a unit that names your specific deck and serial series rather than a generic fit.
Before ordering, confirm the battery and cables are in good shape, because a new solenoid will not fix a no-start problem caused by a weak battery or a faulty ignition switch.
Related reading
- Yardworks Lawn Mower Won't Start After Winter: 6 Fixes That Work
- Yardworks Battery Lawn Mower Won't Start: 7 Causes and Fixes
- Yardman Riding Lawn Mower Won't Start: 7 Causes and Fixes
- Yardman Lawn Mower Won't Start: 8 Causes and Fixes (2026)
- Yard Machines Lawn Mower Won't Start: 7 Causes and Fixes
- Yard Machine Riding Lawn Mower Won't Start: 7 Causes and Fixes



